Concrete floor installation in Denton TX - a slab that's ready for your flooring
Planning a new room, shop or addition that needs a floor? We pour an indoor slab planned for the flooring and the ground under it.
Groundwork Denton Concrete Company is a concrete contractor based in Denton. We pour driveways, patios, foundations and floors, and our concrete floor installation work covers new rooms, garage conversions and shops in Denton and the cities around it. I started this business after years of fixing other people's concrete, so we plan each floor around the ground under it and the flooring that goes on top.
- I come out and write every estimate
- Flooring settled before we pour
- Site cleaned before we pack up
Concrete floor installation starts with what goes on top
A concrete floor is an indoor slab on grade, poured straight onto the ground inside the walls of a room, addition or shop. Homeowners usually call us about concrete floor installation in Denton, TX when they're adding space, converting a room or replacing a floor that's cracked or uneven. Before we pour, I ask what will go on top, because carpet, tile or wood changes how we protect the slab from ground moisture.
Price moves with the room's size, the slab's thickness, whether an old floor comes out and gets hauled off, and how much work the ground needs. The schedule mostly turns on the wait afterward, while the slab hardens and dries enough for your flooring. Your written estimate spells out what's included, and we work from Denton out to the cities around it.
- Base and subgrade. We dig out to firm ground and pack the subgrade, the dirt and base the slab sits on, so the floor doesn't settle later.
- Moisture barrier. When carpet, tile or wood will cover the floor, a moisture barrier goes down first to keep ground vapor from coming up through.
- Pour and finish. We pour and trowel the floor smooth, timing each pass so the top comes out hard instead of soft and dusty.
- Joints and curing. We cut control joints, shallow grooves that give the slab a planned place to crack, then keep it moist while it cures.
Indoor floors we pour
We pour interior slabs for new rooms, converted garages, shops and replacement floors, each one planned around what goes on top and what's underneath it.
Room additions
We set a new room's floor at the right height to meet the house, and if the door sits above the yard, we can pour the concrete steps too.
Garage conversions
Turning a garage into living space usually means leveling the floor and adding moisture protection, so carpet or wood can go down later.
Shops and outbuildings
Workshops, studios and storage buildings get a plain, hard-wearing slab sized for what you'll set on it, from benches to heavy tools.
Replacement floors
When an old floor is cracked, sunken or uneven, we break it out, haul it off, rebuild the base and pour new.
Need something else, like a concrete pool deck or a slab we didn't list here? Call and ask, and I'll tell you if it's work we do.
Why a concrete floor installation is worth doing right
A floor done right sits flat under your flooring, keeps ground moisture away from the glue and boards, and cracks, if it does, along lines we chose. Most of that work is buried by the time you see the finished top.
- Base before looksIf the budget gets tight, I'd cut a finish upgrade before the base, because a smooth top over loose dirt still settles.
- Finish timed rightWe trowel each pass when the concrete is ready, not when it's convenient, since bad timing leaves a weak, dusty or uneven top.
- Thickness for the loadWe size the slab's thickness and steel to what the room will carry, so a shop floor isn't poured like a closet.
- Height set against waterI check where water runs outside so the floor sits high enough that rain heads away from the room, not into it.
How a concrete floor job runs
A call and a site visit
You call or send the form, and you'll hear from me directly to set a time. I come out, measure the room and look at the ground and where water goes.
Your written estimate
I send a written estimate that says what's included, like tear-out and hauling, and we talk through the wait between the pour and your flooring.
Pour, checks and walk-through
Our own crew handles the prep, forms, pour and finish, and I check the work at the key steps. We walk the finished floor with you before we pack up.
Why Denton homeowners call us for floors
I spent years at a property management company patching slabs that had sunk or cracked, so I know what poor prep looks like a few years out. That's why our floors start with the ground under them.
The prep nobody sees
We're best known for driveways, patios and the base under them, and an indoor floor gets the same digging, packing and checking.
Straight answers up front
Before we pour, you'll know what's in the price and what's normal for new concrete, so you're not guessing about the finished floor.
Your satisfaction, guaranteed
That's the promise we make, backed by an estimate that spells out what we're pouring and a crew that answers to me.
Start with a call
Call (940) 287-2036 or use the form below, and tell me about the room, the flooring you have in mind and when you need it.
Concrete floors in Denton and nearby cities
In Denton, the city's Building Safety Division issues permits, reviews plans and inspects building work, and contractors book the inspections. When your floor needs a permit, we file it and schedule those inspections, and if I'm not sure what applies, I check with the city before we start. We're licensed and insured.
Around Denton, many of our floor calls are additions and garage conversions, and the work looks much the same in Corinth and Lewisville. Outside Denton, your own city or county office handles permits, and we work with whichever one covers your address.
Tell us about your floor
Send the room size, the flooring you plan and your move-in date. I'll reply within one business day to set up a free, no-obligation estimate at your property.
Call (940) 287-2036Concrete floor questions we hear
How much does a concrete floor cost in Denton, TX?
A reinforced concrete slab without staining or stamping usually costs about $6 to $11 per square foot in Dallas, according to one cost guide, so treat that as a market guide and not our price. An unreinforced pad runs a little less per foot. Your written estimate prices your own room and says what's included.
Does a concrete floor need a moisture barrier under it?
If carpet, tile, wood or vinyl will cover it, yes, industry guidance says the slab needs protection from ground moisture. Vapor coming up through the slab can make adhesives fail and flooring peel or warp. One barrier maker says even small holes in the sheet can greatly raise that moisture, so ask any crew how they protect it.
How long until I can walk on a new concrete floor or add flooring?
A new slab should usually be walkable within 48 hours, and a Dallas cost guide suggests waiting about a week before heavier loads. It takes about a month to fully cure, and flooring waits until the moisture inside the slab drops to an acceptable level, so we help you plan that gap before your flooring crew comes.
Is it normal for a new concrete floor to crack?
Yes, some cracking is normal on a new floor, and so is a little curling, where the slab edges lift slightly. The concrete industry's floor guide says to expect both on every project. The control joints we cut give cracks a planned line to follow, and I'll show you where they go before we pour.